Electromagnetic Isolation Data Rack Cabinet Alloy Material Strong And Safety YH2004

Strong and safety Electromagnetic isolation Data Rack Cabinet YH2004

Cabinet - the correct choice
By following the inspection sequence below, you can select cabinets that meet your device's priority (including safety, durability, compatibility, and ease of handling) without exceeding your budget. The first consideration should be security. Putting mission-critical IT equipment into a lockable enclosure will make it easy for network administrators to limit the number of people who can open the enclosure.
Physical Requirements List all equipment and its complete measurement data in the cabinet: height, length, width and weight. The total height of these devices will ultimately determine how much equipment can be loaded into the cabinet. Obviously, a tall cabinet can hold more equipment and save more space.
Of course, using the height of the cabinet as much as possible is not the only consideration. There is also a large area at the rear of the cabinet that can be used. This is the reason for measuring the depth of the cabinet. Selecting a deeper cabinet allows two devices to be mounted face-to-face, thus allowing more equipment to be installed. In the above manner, two rows of equipment can be installed in the cabinet. One row is loaded and unloaded from the front door of the cabinet and the other row is loaded and unloaded from the rear door. The cabinet should have an adjustable position. After you have calculated the rack space (in U or 1.75 inches), consider the size of the room. You won't want to see that you need to reload some equipment soon after stuffing the cabinet. Once you buy the cabinet and After installation, these extra equipments often appear, so as a basic principle, the height of the cabinets should be increased by 20% to 30% in order to prepare the system for expansion, which also improves the ventilation conditions of the equipment. Consider the width because it is designed according to the width of the cabinet, but the width of the servers and other peripherals that cannot support the bracket cannot be ignored.
Since the total weight of the equipment is often not light, choose a cabinet that can hold approximately 1,500 pounds, that is, a strong, robust cabinet. Inside the cabinet, the weight of the equipment determines whether the selected carriage is normative or aggravated, and also determines the choice of some other accessories. Select cabinets that are 100% compatible with all servers and meet or exceed all OEMs
The manufacturer's third type of bracket specification. If you want to install a tower or desktop device, the carriage and mounting accessories are required.
Since the device includes network cables, telecommunication cables, and power cables, it is necessary to purchase a hook-and-loop or toothed belt to effectively secure the cables in the cabinet in an orderly manner. It would be nice if the cabinet had a cable management module so that the cables could be directly secured in the vertical device rails. In either case, the upper wall and side walls of the cabinet should have enough fixing rings (to protect the cables), and the cabinet floor can be raised to allow the cables to be routed below.

-We can delivery by sea,and by air,if you need any means,we all accepted;

-We accepted sample and tested,we can supply you samples if you want;

-Our products is OK for series of test,quality is no problem;