Place of Origin:
CHINA
Brand Name:
YUHUI
Certification:
ISO9001
Model Number:
Flexible Size Electromagnetic Isolation Communication Rack Cabinet YH04
The terminal groups shall meet the relevant requirements of GB 14048.7 and GB 14048.8. Use screw-type (bolt-type, post-type, etc.) terminals with tabs (copper wire braid), pinch plates, wiring compartments, etc. to prevent loose parts of the thread ends. Relevant requirements include:
——The terminal shall be able to reliably conduct with the wire, and be fastened and not easily loosened to ensure the necessary contact pressure between the wire and the wire.
——The terminal has good electrical conductivity, resistance to mechanical stress (pressure, torque, etc.) fatigue, wear resistance, and corrosion resistance.
—— The design of terminals and terminal blocks is safe, reliable, and convenient to operate. It can better prevent accidental contact between wire ends and accidents due to the drop of parts (such as washers, nuts, etc.) during wiring.
——The terminals shall have clear and distinct marks; the safety cover and obvious marks shall be provided outside the terminals to prevent misoperation and electric shock.
- Terminal wiring components (such as bolts, gaskets, copper nose, etc.) should be fully configured.
- For AC power distribution units, the rated cross-sectional area of the shunt terminals and the connected cables is not less than 2.5mm2; the arrangement order is from left to right in order of zero (N), phase (L), and ground (PE). Set or wrong settings.
Send your inquiry directly to us
